You are here:Home > Prototyping Supplies & Kits > Chemicals & Supplies
We found 41 results matching your criteria.

416-G, Nitrile Disposable Gloves (pk of 10) 416-T, Transparancy Film, 5 per envelope
Our Price: $5.95 In Stock
Our Price: $7.95 In Stock
Excellent for use with all corrosive chemicals. 8½" x 11" heat stabilized film sheets for use in most laser printers
415-500ML, Ferric Chloride Etchant 416-RP, Etch Resist Pen
Our Price: $7.95 In Stock
Our Price: $8.00 In Stock
Copper Etchant

Ready to use solution designed for etching printed circuit boards and other metals. Recommended for use with M.G. Chemicals Professional Etching Process Kit (416-E) and M.G. Economy Etching Process Kit (416-ES). Note: Do not dilute this product with water. 		For drawing or touching up etch resist circuits or PC boards and on positive films.
41602-250ML, Micro Etch Part A 50-1226, TRF Foils, White, "Flat Packs", 8" Wide x 15' Long
Our Price: $8.95 In Stock
Our Price: $8.95 In Stock
This item is also part of the 41600A Chemical Kit

Only available in USA & Canada.  Must ship either  "FedEx Ground" or "UPS Ground". 		TRF Foils (PCB)
Flat pacsk are 8" Wide x 15' Long
4185-500ML, Resist Stripper 4170-500ML, Negative Photo Resist Developer
Our Price: $9.95 In Stock
Our Price: $9.95 In Stock
Resist Stripper Developing Process:

Dilute 1 part of developer to 10 parts of room temperature water.  Mix well with foam brush.  Submerge exposed board into solution and brush the board gentle with foam brush.  If double sided board, flip the board and to brush the other side and repeat until developing is completed.  The developing process is completed once all the resist has been washed off leaving the image of your schematic on the board.  Take the board out of the solution and then rinse with water.  You are now ready for etching.
418-500ML, Positive Photo Resist Developer 416-ER, Rub-on Etch Resist
Our Price: $9.95 In Stock
Our Price: $9.95 In Stock
For removing exposed resist during the positive photofabrication process.


Disolves exposed photoresist
Concentrated formulation - dilute one part developer to ten parts water
For best results, use in conjunction with M.G. Foam Brush (Cat. No. 416-S)
Also available in the M.G. Photofabrication Kit (Cat. No. 416-K) . 		Simply Rub-On and etch!
Now you can create your very own circuit with little investment in money and time.  Our Rub-On Etch Resist product comes with 8 unique sheets of the most commonly used shapes in circuit board creation.  It even comes with a sheet for you to custom cut your own shape.  All you need to do is Rub-On the shapes and lines onto a plain copper clad board and you are ready for etching.  You will be amazed with the quality of your circuit!
421-125ML, Liquid Tin 415-1L, Ferric Chloride Etchant
Our Price: $10.75 In Stock
Our Price: $11.95 In Stock
Quickly tinplates copper circuits on PC boards in 5 minutes or less at room temperature. Copper Etchant

Ready to use solution designed for etching printed circuit boards and other metals. Recommended for use with M.G. Chemicals Professional Etching Process Kit (416-E) and M.G. Economy Etching Process Kit (416-ES). Note: Do not dilute this product with water.
41603-250ML, Micro Etch Part B 41604-1L, Catalyst Part A
Our Price: $12.95 In Stock
Our Price: $13.45 In Stock
MG Chemicals Micro Etch Part B 41603-250ML
This item is also part of the prototyping Kit 41600A

Only available in USA & Canada.  Must ship either "FedEx Ground or UPS Ground". 		This item is also part of the prototyping Kit 41600A

Only available in USA & Canada.  Must ship either "FedEx Ground" or "UPS Ground".  Additional shipping charges for "HAZMAT" apply.
41601-250ML, Alkaline Cleaner 50-1401, KK-2000 Spray Adhesive
Our Price: $13.95 In Stock
Our Price: $13.95 In Stock
This Alkaline Cleaner is part of the prototyping process Kit 41600A
840-20G, Nickel Print 50-1102, Toner Transfer Paper (10 sheets per pack)
Our Price: $14.95 In Stock
Our Price: $14.95 In Stock
Nickel Print, 840-20G
Resistivity: 1 Ohm · mil

Quick drying
Durable acrylic base pigmented with high purity flake
Excellent for repairing and modifying printed circuits and EMI / RFI shielding applications

Soiled label (product is fine)
840-20G 		Pulsar's Toner Transfer Paper ("TTP" for short) is the ideal medium for capturing extremely precise imaging from either a laser printer or photostatic 'copier' at full 1,200dpi resolution.
41606-250ML, Accelerator 416DFR-5, Dry Film Resist - Negative (Discontinued by MG Chemicals)
Our Price: $16.95 In Stock
Our Price: $17.65 (Out of Stock)
This item is also part of the 41600A Chemical Kit

Only available in USA & Canada.  Must ship either "FedEx Ground" or "UPS Ground". 		Prototype professional quality pcb’s using dry film resist.
41692-500ML, Tin and Solder Stripper 50-1501, Single Sided PCB, 8"x10", 1/2 oz., (2-pack)
Our Price: $17.95 In Stock
Our Price: $17.95 In Stock
It is designed to be used in immersion or spray applications. Tin & Solder Stripper provides minimal sludge generation during operation and a low copper attach rate. It is easily waste treated and contains no hazardous fluorides, fluoborates, or peroxides. It operates at room temperature for ease of use and reduction of corrosive vapors. SINGLE-Sided PCB
1/2oz Copper
.032" Thick
2 Panels
8"x10"
41670-1L, Copper Electroplating Solution 50-1502, Double Sided PCB, 8"x10", 1/2 oz., (2-pack)
Our Price: $19.95 In Stock
Our Price: $19.95 In Stock
Copper Electroplating Solution, 41670-1L
Recommended for use with MG Chemicals' Electroplating Tank (Cat. No. 41650) and Copper Bar Anode Set (Cat. No. 41660).

Required for Professional Prototyping Process and the Electroplating Process. 		DOUBLE-Sided PCB
1/2oz Copper
.032" Thick
2 Panels
8"x10"
B6861, Nitrile Gloves 5Mil Small (100/Pkg) B6862, Nitrile Gloves 5Mil Medium (100/Pkg)
Our Price: $21.66 In Stock
Our Price: $21.66 In Stock
Nitrile gloves are made from 100% nitrile which resists
punctures. They offer amazing sensitivity and reduces
hand fatigue. This unique formulation makes these
disposable gloves last much longer than latex or vinyl,
and are ambidextrous. 		Nitrile gloves are made from 100% nitrile which resists
punctures. They offer amazing sensitivity and reduces
hand fatigue. This unique formulation makes these
disposable gloves last much longer than latex or vinyl,
and are ambidextrous.
B6863, Nitrile Gloves 5Mil Large (100/Pkg) 410-1KG, Ammonium Persulfate, Copper Etchant
Our Price: $21.66 In Stock
Our Price: $24.95 In Stock
Nitrile gloves are made from 100% nitrile which resists
punctures. They offer amazing sensitivity and reduces
hand fatigue. This unique formulation makes these
disposable gloves last much longer than latex or vinyl,
and are ambidextrous. 		Ammonium Persulfate, Copper Etchant, 410-1KG
4101-1KG, Sodium Persulfate B6872, Nitrile Gloves, 6 Mil, Medium (100/Pkg)
Our Price: $24.95 In Stock
Our Price: $28.63 In Stock
Copper Etchant

Sodium Persulfate is a good replacement for Ammonium Persulfate. Like Ammonium Persulfate crystals, they are used as an alternative to the traditional ferric chloride to produce a cleaner copper etchant solution. Mixed product must be stored in a vertical container. 		Nitrile gloves are made from 100% nitrile which resists
punctures. They offer amazing sensitivity and reduces
hand fatigue. This unique formulation makes these
disposable gloves last much longer than latex or vinyl,
and are ambidextrous.
B6873, Nitrile Gloves, 6 Mil, Large (100/Pkg) 415-4L, Ferric Chloride Etchant
Our Price: $28.63 In Stock
Our Price: $28.95 In Stock
Ferric Chloride Etchant
Nitrile gloves are made from 100% nitrile which resists
punctures. They offer amazing sensitivity and reduces
hand fatigue. This unique formulation makes these
disposable gloves last much longer than latex or vinyl,
and are ambidextrous. 		Copper Etchant

Ready to use solution designed for etching printed circuit boards and other metals. Recommended for use with M.G. Chemicals Professional Etching Process Kit (416-E) and M.G. Economy Etching Process Kit (416-ES). Note: Do not dilute this product with water.
421-500ML, Liquid Tin 41692-1L, Tin and Solder Stripper has been replaced with 41692-500ML (same product, smaller size)
Our Price: $37.95 In Stock
Our Price: $40.00 (Out of Stock)
Quickly tinplates copper circuits on PC boards in 5 minutes or less at room temperature. Removes tin from copper in under 5 minutes. Simply submerge the tin plated board in solution and agitate.
41672-4L, Tin Electroplating Solution 41605-250ML, Catalyst Part B
Shipping includes HAZMAT Charges
Our Price: $45.00 In Stock
Our Price: $56.75 In Stock
Must Ship FedEx Ground

Recommended for use with MG Chemicals' Electroplating Tank (Cat. No. 41650) and Tin Anode Set (Cat. No. 41662).

Required for Professional Prototyping Process and the Electroplating Process. 		This item is also part of the prototyping Kit 41600A

Only available in USA & Canada.  Must ship either "FedEx Ground" or "UPS Ground".
41670-4L, Copper Electroplating Solution 50-1003, PCB "Fab-In-A-Box" Starter Kit
Shipping includes HAZMAT Charges
Our Price: $65.00 In Stock
Our Price: $73.95 In Stock
MUST ship FedEx Ground

Recommended for use with MG Chemicals' Electroplating Tank (Cat. No. 41650) and Copper Bar Anode Set (Cat. No. 41660).

Required for Professional Prototyping Process and the Electroplating Process. 		Starter Kit Includes:

Toner Transfer Paper:
2ea 10-sheet packs
8-1/2" x 11"
Resealable bags

Copper Clad Boards:
2ea Single & Double-Sided
1/2oz Copper, .032" thick
4 - 8" x 10" panels

Toner Reactive Foils:

Seals Toner Images
GreenTRF - 8"x15'
WhiteTRF - 8"x15'
41660, Copper Bar Anode Set 41662, Tin Bar Anode Set
Our Price: $85.00 In Stock
Our Price: $155.00 In Stock
Contents:

8 Copper Bar Anodes with hooks (6” x 3/8” anodes) 		Designed for use with MG Chemicals' Electroplating Tank (Cat. No. 41650) and Tin Plating Solution (Cat. No. 41672).

Required for Professional Prototyping Process and the Electroplating Process (when plating tin).
41600A, Electroless Copper Plating Chemical Kit
Our Price: $159.89
Setup Cost: $60.00 In Stock
Electroless Copper Plating Chemical Kit, 41600A
This kit is a key component of the MG Chemicals Professional Prototyping Process, which allows professional electronic engineers to prototype circuit boards with copper plated through holes themselves, avoiding having to send their designs to prototyping companies.

41600-A