MinnTech Electronics

This electroplating tank has been designed for use with the MG Professional Prototyping Process, but it will work with any electroplating system.

• Use of this product requires
• A rectifier (capable of at least 3 amps, but no more then 25 amps)
• A magnetic stirrer with 17 cm x 17 cm plate (recommended, but other agitation systems are possible)
• Anodes (of the metal being plated)
• Electroplating solution (suitable to the metal being plated)
• Experienced electroplaters may use this tank with whatever anodes and solution they choose, but for people new to electroplating, MG Chemicals offers ready to use solutions and anodes.
• Other products required to plate copper using the MG Chemicals system:
• Copper Anode Set (Cat. No. 41660)
• Copper Electroplating Solution (Cat. No. 41670)
• Other products required to plate tin using the MG Chemicals system:
• Tin Anode Set (Cat. No. 41662)
• Tin Electroplating Solution (Cat. No. 41672)
• Read complete instructions for the MG Chemicals Professional

Contents:

3.3 gallon plastic tank with holes for bus bars
Tank lid
Two Solid Copper Anode Bus Bars (3/8” x 10.5”) with red wires and connector
One Solid Copper Cathode Bus Bar (3/8” x 10.5”) with black wire and connector
5” Copper Cathode Hook