You are here:Home > Chemicals
We found 40 results matching your criteria.
Safety First!

Please be familiar with how to use and dispose of chemicals prior to use.  All MSDS are available by linking on "MSDS" from our Home Page.  We will be glad to provide an MSDS with each shipment when requested.
Sort By:
1
51773, Ultratane Butane Fuel, 5 1/8 oz. (145 gm) Canister 11799, Ultratane Butane Fuel, 3 3/4 oz. Canister
Our Price: $6.48
Our Price: $6.48
Triple-refined formula reduces clogging of filters
Special vapor pressure promotes consistent ignition
Contains no CFC’s, canister includes single-piece universal filling tip
Recommended refill for all Ultratorch® & Master Butane-powered products

$45 Hazmat charges apply.  Must ship FedEx Ground 		Triple-refined formula reduces clogging of filters
Special vapor pressure promotes consistent ignition
Contains no CFC’s, canister includes single-piece universal filling tip
Recommended refill for all Ultratorch® & Master Butane-powered products

Must ship FedEx Ground
435-55ML, Thinner Cleaner Solvent 415-500ML, Ferric Chloride Etchant
Our Price: $7.95
Our Price: $7.95
For thinning M.G. Chemicals Coating up to 50%. Also for use cleaning workplace and equipment after using conformal coatings. Copper Etchant

Ready to use solution designed for etching printed circuit boards and other metals. Recommended for use with M.G. Chemicals Professional Etching Process Kit (416-E) and M.G. Economy Etching Process Kit (416-ES). Note: Do not dilute this product with water.
416-RP, Etch Resist Pen B8018, Mat & Rubber Cleaner 1 QT
Our Price: $8.00
Our Price: $8.49
For drawing or touching up etch resist circuits or PC boards and on positive films. Botron Static Dissipative Rubber and Vinyl mat cleaner B8018 is designed and formulated to clean surfaces of table mats ensures that all insulative dirt and other contaminants are removed. Botron offers two sizes 6oz and one quart spry bottles. Cleanstat Rubber and Vinyl mat cleaner will not streak is quick drying Non-aerosol static dissipative surface cleaner. Unlike other mat cleaner on the market that do not do a good job cleaning rubber table mats Botron mat cleaner out performs them all.
41602-250ML, Micro Etch Part A 4185-500ML, Resist Stripper
Our Price: $8.95
Our Price: $9.95
This item is also part of the 41600A Chemical Kit

Only available in USA & Canada.  Must ship either  "FedEx Ground" or "UPS Ground". 		Resist Stripper
4170-500ML, Negative Photo Resist Developer 418-500ML, Positive Photo Resist Developer
Our Price: $9.95
Our Price: $9.95
Developing Process:

Dilute 1 part of developer to 10 parts of room temperature water.  Mix well with foam brush.  Submerge exposed board into solution and brush the board gentle with foam brush.  If double sided board, flip the board and to brush the other side and repeat until developing is completed.  The developing process is completed once all the resist has been washed off leaving the image of your schematic on the board.  Take the board out of the solution and then rinse with water.  You are now ready for etching. 		For removing exposed resist during the positive photofabrication process.


Disolves exposed photoresist
Concentrated formulation - dilute one part developer to ten parts water
For best results, use in conjunction with M.G. Foam Brush (Cat. No. 416-S)
Also available in the M.G. Photofabrication Kit (Cat. No. 416-K) .
416-ER, Rub-on Etch Resist 8341-10ML, No Clean Flux Paste in Syringe Dispenser
Our Price: $9.95
Our Price: $10.45
Simply Rub-On and etch!
Now you can create your very own circuit with little investment in money and time.  Our Rub-On Etch Resist product comes with 8 unique sheets of the most commonly used shapes in circuit board creation.  It even comes with a sheet for you to custom cut your own shape.  All you need to do is Rub-On the shapes and lines onto a plain copper clad board and you are ready for etching.  You will be amazed with the quality of your circuit! 		A unique mixture of high grade synthetic resin and thixotropic agents designed specifically for use with high temperature lead free and conventional Sn/Pb alloys. It provides the fluxing activity levels that promote fast wetting action and maximum wetting spread.
421-125ML, Liquid Tin 803-500ML, Projection Tube Coolant
Our Price: $10.75
Our Price: $10.95
Quickly tinplates copper circuits on PC boards in 5 minutes or less at room temperature. Projection Tube Coolant
B8400, Clean Stat Easy Spray Buff (1 qt) 415-1L, Ferric Chloride Etchant
Our Price: $11.50
Our Price: $11.95
ESD Cleaner Copper Etchant

Ready to use solution designed for etching printed circuit boards and other metals. Recommended for use with M.G. Chemicals Professional Etching Process Kit (416-E) and M.G. Economy Etching Process Kit (416-ES). Note: Do not dilute this product with water.
41672-1L, Tin Electroplating Solution 41670-1L, Copper Electroplating Solution
Our Price: $11.95
Our Price: $11.95
Tin Electroplating Solution, 41672-1L Copper Electroplating Solution, 41670-1L
MUST Ship FedEx Ground

Recommended for use with MG Chemicals' Electroplating Tank (Cat. No. 41650) and Tin Anode Set (Cat. No. 41662).

Required for Professional Prototyping Process and the Electroplating Process. 		Recommended for use with MG Chemicals' Electroplating Tank (Cat. No. 41650) and Copper Bar Anode Set (Cat. No. 41660).

Required for Professional Prototyping Process and the Electroplating Process.
41603-250ML, Micro Etch Part B 41604-1L, Catalyst Part A
Our Price: $12.95
Our Price: $13.45
MG Chemicals Micro Etch Part B 41603-250ML
This item is also part of the prototyping Kit 41600A

Only available in USA & Canada.  Must ship either "FedEx Ground or UPS Ground". 		This item is also part of the prototyping Kit 41600A

Only available in USA & Canada.  Must ship either "FedEx Ground" or "UPS Ground".  Additional shipping charges for "HAZMAT" apply.
41601-250ML, Alkaline Cleaner 41606-250ML, Accelerator
Our Price: $13.95
Our Price: $16.75
This Alkaline Cleaner is part of the prototyping process Kit 41600A This item is also part of the 41600A Chemical Kit

Only available in USA & Canada.  Must ship either "FedEx Ground" or "UPS Ground".
435-1L, Thinner Cleaner Solvent 838-340G, Total Ground, Carbon Conductive Coating
Our Price: $16.95
Our Price: $16.95
For thinning M.G. Chemicals Coating up to 50%. Also for use cleaning workplace and equipment after using conformal coatings. The 838 Total Ground Carbon Conductive Coating is an economical, acrylic paint that is used to create conductive, static free surfaces with excellent characteristics. Coated surfaces reduce electromagnetic or radio frequency interference (EMI/RFI). The carbon in the coat resists rubbing off to the touch. Further, the cured coat is designed to withstand large temperature changes without cracking.
416DFR-5, Dry Film Resist - Negative 41692-500ML, Tin and Solder Stripper
Our Price: $17.65
Our Price: $17.95
Prototype professional quality pcb’s using dry film resist. It is designed to be used in immersion or spray applications. Tin & Solder Stripper provides minimal sludge generation during operation and a low copper attach rate. It is easily waste treated and contains no hazardous fluorides, fluoborates, or peroxides. It operates at room temperature for ease of use and reduction of corrosive vapors.
410-1KG, Ammonium Persulfate, Copper Etchant 4101-1KG, Sodium Persulfate
Our Price: $24.95
Our Price: $24.95
Ammonium Persulfate, Copper Etchant, 410-1KG Copper Etchant

Sodium Persulfate is a good replacement for Ammonium Persulfate. Like Ammonium Persulfate crystals, they are used as an alternative to the traditional ferric chloride to produce a cleaner copper etchant solution. Mixed product must be stored in a vertical container.
415-4L, Ferric Chloride Etchant 421-500ML, Liquid Tin
Our Price: $28.95
Our Price: $37.95
Ferric Chloride Etchant
Copper Etchant

Ready to use solution designed for etching printed circuit boards and other metals. Recommended for use with M.G. Chemicals Professional Etching Process Kit (416-E) and M.G. Economy Etching Process Kit (416-ES). Note: Do not dilute this product with water. 		Quickly tinplates copper circuits on PC boards in 5 minutes or less at room temperature.
41692-1L, Tin and Solder Stripper has been replaced with 41692-500ML (same product, smaller size) 842-20G, Silver Print, 3/4 oz.
Our Price: $40.00
Our Price: $45.00
Removes tin from copper in under 5 minutes. Simply submerge the tin plated board in solution and agitate. Resistivity: 0.2 Ohm · mil


Quick drying
Durable acrylic base pigmented with high purity flake
Excellent for repairing and modifying printed circuits and
EMI / RFI shielding applications
Silver pigment provides excellent corrosion resistance
41670-4L, Copper Electroplating Solution 41672-4L, Tin Electroplating Solution
Our Price: $45.00
Our Price: $45.00
MUST ship FedEx Ground

Recommended for use with MG Chemicals' Electroplating Tank (Cat. No. 41650) and Copper Bar Anode Set (Cat. No. 41660).

Required for Professional Prototyping Process and the Electroplating Process. 		Must Ship FedEx Ground

Recommended for use with MG Chemicals' Electroplating Tank (Cat. No. 41650) and Tin Anode Set (Cat. No. 41662).

Required for Professional Prototyping Process and the Electroplating Process.
41605-250ML, Catalyst Part B 41660, Copper Bar Anode Set
Our Price: $56.75
Our Price: $85.00
This item is also part of the prototyping Kit 41600A

Only available in USA & Canada.  Must ship either "FedEx Ground" or "UPS Ground". 		Contents:

8 Copper Bar Anodes with hooks (6” x 3/8” anodes)
41662, Tin Bar Anode Set 840-250G, Nickel Print
Our Price: $155.00
Our Price: $159.00
Nickel Print, 840-20G
Designed for use with MG Chemicals' Electroplating Tank (Cat. No. 41650) and Tin Plating Solution (Cat. No. 41672).

Required for Professional Prototyping Process and the Electroplating Process (when plating tin). 		Resistivity: 1 Ohm · mil


Quick drying
Durable acrylic base pigmented with high purity flake
Excellent for repairing and modifying printed circuits and EMI / RFI shielding applications
840-250G Nickel Print

If thinning is required, use M.G. Thinner (Cat. No. 435-55ML).
41600A, Electroless Copper Plating Chemical Kit 842-250G, Silver Print
Our Price: $159.89
Setup Cost: $60.00
Our Price: $415.00
Electroless Copper Plating Chemical Kit, 41600A
This kit is a key component of the MG Chemicals Professional Prototyping Process, which allows professional electronic engineers to prototype circuit boards with copper plated through holes themselves, avoiding having to send their designs to prototyping companies.

41600-A 		Resistivity: 0.2 Ohm · mil
Quick drying
Durable acrylic base pigmented with high purity flake
Excellent for repairing and modifying printed circuits and
EMI / RFI shielding applications
Silver pigment provides excellent corrosion resistance
If thinning is required use M.G. Thinner (Cat. No. 435-55ML). Also available in a micro-tip dispensing pen format, # 8420-P (also in stock).
   
 
1